• Extra large dial face for easy reading.
• Hardened stainless throughout.
• Inside, outside depth & step measurements.
• .001" Graduation.
• Supplied with fitted case.

• Accuracy of ±.001" over the first 4 inches; ±.0015" for the next two inches.
• Small dots between the graduations subdivide readings to .0005"
• Identical to Tesa dial calipers except with a thumb wheel for more control.
• Measuring Range: 0 - 6"
• .001" Graduation.
• Swiss made.
• Model 075 116550

• Fine German design and sturdy construction ensure a long life of reliable and accurate service in these heavy-duty calipers.
• Oversized dial with microfine graduations for easy reading.
• Inside, outside and depth measurements.
• "Knife Edge" top jaws for measuring threads.
• Inside measurements are obtained by use of the nibs on the bottom jaws.
• Hardened stainless steel throughout; measuring faces are ground and microlapped for exceptional accuracy.
• Knurled lock assures precise settings.
• Jaw Depth 3-7/8"
• .200 per Rev.
• Thumb Roll

• Fine German design and sturdy construction ensure a long life of reliable and accurate service in these heavy-duty calipers.
• Oversized dial with microfine graduations for easy reading.
• Inside and outside measurements possible.
• Extra long jaws.
• Hardened stainless steel throughout; measuring faces are ground and microlapped for exceptional accuracy.
• Knurled lock assures precise settings.
• Jaw Depth 3-1/2"
• .200 per Rev.
• Thumb Roll

• With Ratchet Stop for constant force.
• Supplied in fitted plastic case.
• Graduation: .0001"

Mechanical digit counter with .001" reading for quick and error-free reading.

• Carbide Tipped Faces.
• With a standard except for 0-1 model.
• Graduation: .0001"
• Measuring faces: Carbide tipped.

Measures tubing thickness, shoulder edge distance, rivet head height, etc. with interchangeable anvils (flat anvil, rod anvil, V-anvil).

• Supplied with Flat Anvil (201216) and Rod Anvil: .118 dia. rod anvil (201217) for 0-1” model, .197” Dia. Rod Anvil (201379) for 1-2”.
• 1-2" comes with standard.
• Friction thimble.
• Supplied in fitted plastic case.

• Mechanical metric digit counter with an inch standard thimble.
• Mechanical digit counter with 0.01mm or .001" reading for quick and error-free reading.
• Carbide Tipped Faces.
• Friction thimble.
• Supplied in fitted plastic case.

• Hammertone, baked-enamel-finished frame.
• Ratchet Stop or Friction Thimble for exact repetitive readings.
• With a standard bar except for 0-1 model.
• Accuracy: Refer to the list of specifications.
• Graduation: .001" or .0001"
• Flatness: .000024 for models up to 12, .00004 for models over 12".
• Measuring faces: Carbide tipped.

• Carbide Tipped Anvil.
• Thimble Friction Clutch.
• Model 71.115900

• Carbide tipped anvil
• Clear graduations on satin chrome finish
• Hammertone baked enamel finish
• Ratchet Stop
• 0.0001" Graduation
• Supplied in fitted plastic case

• 2-12" Range
• 0.001" Graduation
• +/-0.0003" Accuracy
• 10 Piece Set
• Carbide Face
• Supplied in Plastic Fitted Case

• 0-1" Range
• Graduation .001"
• Non-rotating spindle with optional seven interchangeable anvils (flat, spline, spherical, point, knife-edge, disk, and blade) for a wide range of applications
• Interchangeable anvils (pair) are optional.
• V-anvils and conical spindle tips (matching pair) for screw thread measurement are also available.
• With Ratchet Stop for constant force.

• 0-1" Range
• Graduation: .01mm/.001"
• Accuracy: +/- .00025"
• Resolution: .001mm or .001mm/.00005"
• Measuring faces: Carbide tipped
• With Ratchet Stop for constant force.
• Supplied in fitted plastic case
• Made in Japan

• 3 Piece Set
• 0-1 micrometer .0001 Graduation with Friction Thimble
• 6" Dial Caliper 0-200 Rev. .001 Graduation
• 6" Flexible Scale 16R Graduation
• Complete in Fitted Case

List Price $276.00
Sale Price $125.00

• Graduations .0001"
• Carbide tips on every size, with a microlap finish on the measuring faces.
• Positive lever locking clamps
• Complete in fitted case with 2 standards
• Made in Japn by NSK